1. Overview

It is suitable for large-scale dry oil centralized lubrication systems, as an oil supply equipment that uses centralized filling and grease filling devices for oil reservoirs in numerous lubrication pump stations. The pump has high output pressure and large flow rate, which expands the range of centralized grease filling and greatly shortens the time required for grease filling.

2. Technical parameters

The applicable medium is grease with a penetration of 265 ~ 385 (25℃, 150g) 1/10mm (NLGI 0# ~ 2#), and viscosity grade greater than N68Smart lubricationOil; applicable ambient temperature -20 ℃ ~ 80 ℃.

3. Instructions for use

1. Use the bracket (prepared by the user) as a support, use four M16 bolts to fix the pneumatic pump on the bracket, and insert the plunger pump tube vertically into the grease in the oil storage tank.

2. The air inlet pipeline must be equipped with three major air source processing components (filter, pressure reducer, and oil mist device).

3. The medium used must be within the specified viscosity range.

4. The oil outlet of the pneumatic pump must be equipped with a one-way valve.

5. It is recommended that the air supply volume be adjusted so that the pump operating frequency does not exceed 40 times/min.

6. When using 2# grease, it is recommended to add an oil pan in the oil tank to avoid emptying the pump due to poor fluidity of the grease.

7. The exhaust port is equipped with a muffler (prepared by the user, interface Rc1/2).

4. Overall dimensions