1. Overview

It is suitable for dry oil centralized lubrication systems and centralized grease filling systems with high lubrication frequency and dense lubrication points.Smart lubricationAgent pressurizing equipment. It is especially suitable for places with sufficient air supply and explosion-proof requirements where electric lubrication pumps are not suitable. The pump has high output pressure, large flow rate, and smooth operation. It can still achieve long-distance transportation without the need for an overflow safety valve in the system pipeline.

2. Technical parameters

The applicable medium is grease with a penetration of 265~385 (25℃, 150g) 1/10mm (NLGI 0#-2#) and lubricating oil with a viscosity grade greater than N68; applicable ambient temperature is -20~80℃.

3. Instructions for use

1. The pump should be installed on a special drum cover (200L drum covers are supplied separately by our company), and the pump tube should be inserted vertically into the 200L oil drum.

2. The air inlet pipeline must be equipped with three major parts for air source processing.

3. The oil outlet pipeline of the pneumatic lubrication pump must be equipped with a one-way valve.

4. When using 2# grease or high-viscosity lubricating oil, an oil pressure plate must be installed in the oil barrel.

5. It is recommended that the air supply volume be adjusted so that the pump operating frequency is within the range of 40 to 50 times/min. It is strictly prohibited to use it more than 60 times/min to avoid damage to internal moving parts.

6. The exhaust port is equipped with a muffler (prepared by the user).

4. Overall dimensions