1. Conditions of use

This product is suitable for thin oil lubrication of mechanical equipment in metallurgy, mining, building materials, energy, transportation and other industries. The working medium is industrial lubricating oil with viscosity grade N22~N460 (equivalent to IS0 VG22~460).

The characteristic of the integrated thin oil station is that all parts are arranged on the fuel tank. The performance parameters are basically the same as the XYZ-G type. However, five specifications of the thin oil station with a flow rate greater than 125L/min are also made into an integral type. Larger oil stations can still be hoisted as a whole without anchor bolts, making installation particularly convenient; especially suitable for occasions where the thin oil footprint is limited.Process lubrication; However, sufficient maintenance height and area must be left above and around the thin oil station; since the oil pump is on the top of the oil tank, the selected oil pump should have sufficient suction height, especially when the viscosity of the lubricating oil is high and the oil temperature is low, more attention must be paid .

The oil supply pressure of the integrated thin oil station is ≤0.4MPa, the filtration accuracy is 0.08~0.12mm (small values ??are allowed for low viscosity), the cooling water temperature is ≤30℃, the pressure is 0.2~0.4MPa, and the cooler oil inlet temperature is 50℃, the temperature drop after passing through the cooler is ≥8℃; use an electric heater to increase the oil temperature.

2. Working principle

Like the XYZ-G type ≤125L/min thin oil station, an electric heater is also used to increase the oil temperature.

3. Structural characteristics

It is also the same as the XY ZG type ≤125L/min thin oil station, but after adopting magnetic mesh integration for oil return filtration, the additional magnetic filter is canceled; the instrument panel (panel) is also the same as XYZ-6G~125G.

7. Dashboard

It is the same as the instrument panel (board) of the XYZ-6G~125G thin oil station, see Figure 1-1-7 on P8