1. Conditions of use

VS series two-line distributor is suitable for two-line dry oil centralized lubrication system with nominal pressure of 20MPa. Under the action of the alternating oil supply pressure of the two oil supply main pipes, the oil supply pressure directly controls the piston action to supply oil, thereby completing the function of quantitatively distributing grease to the lubrication points.

The oil supply ports of this series of dual-line distributors are at the bottom, and the forward and reverse movements of the distributor piston are discharged from the same oil supply port.Process lubricationGrease, you can also directly observe the working condition of the distributor from the movement of the indicator rod. At the same time, you can also easily adjust the oil supply amount of each oil supply port within the specified range by adjusting the screw.

2. Technical parameters

The applicable medium is 1/10mm grease (NLGI 0# ~ 1#) with a cone penetration of not less than 265 (25℃, 150g) or lubricating oil with a viscosity grade greater than N68; the operating ambient temperature is -10℃ ~ +80℃, When the medium used is lubricating oil, it can be used under a pressure of 10MPa.

3. Dimensions

4. Instructions for use

1. The specified media must be used in the specified environment.

2. When used in dusty, humid and harsh environments, a protective cover should be provided.

3. The adjustment of the oil supply should be carried out with the indicator rod retracted. After the adjustment is completed, tighten the locking screw.

4. The surface in contact with the distributor should be smooth and flat, and the mounting bolts should not be over-tightened to avoid affecting normal operation.

5. Model description

6. Ordering Instructions

If the ambient temperature of the distributor is other than -10℃~+80℃, it must be specified in the order contract so that low- and high-temperature resistant oil seals can be used during supply.