1. Conditions of use

The ZPU electric lubrication pump is suitable for single or double-line dry oil centralized lubrication systems with high lubrication frequency, long piping length, dense lubrication points, and a nominal pressure of 40MPa, as a delivery device for supplying lubricant. It can also be equipped with a mobile trolley, high-pressure hose, grease gun and cable to form a mobile electric lubrication pump device, which is used for mobile lubrication on stand-alone equipment with low lubrication frequency, few lubrication points, large oil supply and inconvenient centralized lubrication. lubricating.

This pump is a single-outlet electric lubrication pump driven by a reduction motor to discharge lubricant. There are three displacement specifications, which can easily form a low-investment centralized lubrication system according to different needs; the dry oil centralized lubrication composed of it has the characteristics of long transportation distance and small oil supply pipe diameter.

2. Technical parameters

The medium used is grease (NLGI 0#-2#) with a cone penetration of not less than 265 (25℃, 150g) 1/10mm and lubricating oil with a viscosity grade greater than N68.

3. Model description

4. Overall dimensions

5. Instructions for use

1. It should be installed in a place where the ambient temperature is suitable, there is little dust, and it is convenient for adjustment, inspection, maintenance, disassembly and cleaning, and grease refilling.

2. It should be arranged in the center of the system as much as possible to shorten the length of the system piping and maintain a low pressure drop so that the pump can generate enough pressure to overcome the back pressure of the lubrication point.

3. Before using for the first time, add a certain amount ofSmart lubricationoil, let the pump run for a few minutes, and then use an electric oil pump to add grease through the grease port in a closed manner.

4. When the motor reducer is used for the first three months, an appropriate amount of 3# aluminum disulfide lubricant must be added from the exhaust plug hole, and then every four months.

5. This pump is for indoor installation. When used outdoors or in harsh environments, protective measures must be taken.

6. Ordering instructions

1. When ordering an electric lubrication pump mobile device with a trolley, the required hose length and cable length must be specified in the contract.

2. The electric lubrication pump works at short intervals. If the user needs to work continuously for a long time, please indicate it in the contract.