1. Overview

GJ series pipe clamps are currently the most comprehensive series of domestic pipe clamps.Dry thin oil lubricationSuitable for fixing pipes in hydraulic, lubrication, pneumatic and high-pressure water systems. The system working pressure can reach 32MPa; the working temperature is generally -40~80℃, and can be used up to 120℃. This type of pipe clamp has five specifications, and is suitable for a wide range of pipe outer diameters, from Φ6 to Φ150. The pipe clamp gasket is generally made of ordinary rubber. If you need to use other rubber, please make a special request when ordering. If the outer diameter of the pipe clamp does not meet the series in the specifications, it can be manufactured according to the order requirements. The outer color of the pipe clamp is generally black paint, and special requirements should be made in advance.

2. Overall dimensions

3. Model marking

4. Instructions for use

1. When the pipeline is arranged on the equipment, a pipe clamp with a base plate can be used, and the base plate is directly welded to the equipment.

2. The pipeline is arranged in the trench, and there are embedded parts (steel plates) on the side walls of the trench. When using a pipe clamp with a bottom plate, the bottom plate is welded to the channel steel, and the channel steel is welded to the buried steel.Above, see Figure 1. When using a pipe clamp without a base plate, the pipe clamp is connected to the channel steel with bolts, and holes must be drilled in the channel steel. Pipe clamps are generally arranged in a row, but can also be staggeredlayout.

3. The pipeline is arranged along the side wall of the trench, with embedded parts on the wall. The bottom plate of the pipe clamp is welded to the channel steel, and the channel steel is welded to the embedded parts, see Figure 2.

4. The pipeline is arranged on the bracket on the side wall of the trench. The bracket is welded to the embedded parts. The bottom plate of the pipe clamp is welded to the bracket. When the cantilever of the pipe clamp is large, attention should be paid to the strength of the bracket.

Spend. See Figure 3.