1. Conditions of use

VW series distributors are suitable for dual-line dry oil centralized lubrication systems with a nominal pressure of 20MPa. Under the action of the alternating oil supply pressure of the two oil supply main pipes, the oil supply pressure directly controls the piston action to supply oil, thereby completing the function of quantitatively distributing grease to the lubrication points.

This type of double-line distributor is equipped with oil outlets on both the upper and lower sides. The distributor piston moves forward and reverse to discharge oil from the upper and lower oil outlets respectively.Process lubricationagent. You can also directly observe the working condition of the distributor from the movement of the indicator rod. At the same time, you can also easily adjust the oil output of each oil outlet within the specified range by adjusting the screws.

5. Instructions for use

1. The specified media must be used in the specified environment.

2. When used in dusty, humid and harsh environments, a protective cover should be provided.

3. The adjustment of the oil supply should be carried out with the indicator rod retracted. After the adjustment is completed, tighten the locking screw.

4. There is a two-in-one oil outlet structure between the upper and lower oil outlets of the distributor. It is easy to change the odd number of oil outlets. When using, you only need to unscrew the screws in the holes and use R1 for the upper or lower outlet that is not in use. /4 Just plug the screw plug.

5. The surface in contact with the distributor should be smooth and flat, and the mounting bolts should not be over-tightened to avoid affecting normal operation.

6. Ordering Instructions

If the ambient temperature of the distributor is other than -10℃~80℃, it must be specified in the order contract so that low- and high-temperature resistant oil seals can be used during supply.