1. Conditions of use

YXQ type oil flow transmitter is used in thin oil lubrication system. Through it, the oil flow condition can be visually observed and the oil quantity shortage or flow cutoff signal can be sent out through its signaling device, thereby achieving remote monitoring or control.Process lubricationThe applicable medium is lubricating oil with viscosity grade N22~N460, diameter DN10~50 is threaded connection, DN80 is flange connection, and the nominal pressure is 0.4MPa.

2. Technical parameters

3. Dimensions

4. Model description

5. Electrical parameters

6. Precautions for use

1. The direction of oil flow and the direction indicated by the oil flow transmitter should be the same.

2. The switch must pass through the load before being connected to the power supply to avoid damage to the switch.

3. If the output form requires normally closed or the output current has special requirements, please specify it when ordering; if the proximity switch type is not specified, configure the PNP type DC three-wire type.