1. Overview

JPQ-K series (original ZP type) progressive distributor is suitable for single-line progressive dry oil centralized lubrication systems with a nominal pressure of 16MPa to quantitatively distribute grease to each lubrication point.

5. Instructions for use

1. The distributor has a single-piston multi-piece combined structure, each piece has two oil outlets, and is divided into four types: JPQ1, JPQ2, JPQ3 and JPQ4.

① Each type of distributor is generally combined with single pieces with equal rated oil supply. If necessary, single pieces with different rated oil amounts can also be mixed and combined.

② When combining JPQ4 type, a control piece is required. This piece has no oil supply port.

③Two or more adjacent oil supply ports can be combined into one oil supply port for oil supply. The oil supply volume of this oil supply port is the sum of the rated oil supply volumes of all merged oil supply ports.

2. JPQ1 type and JPQ2 type distributors are used in series in the system, and JPQ3 type and JPQ4 type distributors are used in parallel in the system.

3. The distributors are equipped with a movement indicator rod for observing the working condition of the distributor. Limit switches can also be installed as needed.Dry thin oil lubricationSystem control and monitoring.

4. JPQ2 and JPQ4 distributors can be equipped with overpressure indicators as needed.

6. Ordering Instructions

Single-chip mixing combinations of the same type but different rated oil supply volumes or multiple oil outlets combined for oil supply must be specified separately when ordering.