1. Overview

KS series two-line distributor is suitable for dual-line dry oil centralized lubrication systems with a nominal pressure of 20MPa. As a metering oil supply device, it is directly controlled by the oil supply pressure under the alternating oil supply pressure of two oil supply main pipes. The piston moves to supply oil and complete the function of quantitatively distributing grease to the lubrication points.

The oil outlets of this series of double-line distributors are evenly distributed on the bottom surface, and the forward and reverse movements of the distributor piston are discharged from the same oil supply port.Process lubricationGrease, you can also directly observe the working condition of the distributor from the movement of the indicator rod. At the same time, you can also easily adjust the oil supply amount of each oil outlet within the specified range by adjusting the screw.

5. Ordering Instructions

If the distributor is installed and used at an ambient temperature other than -10°C to +80°C, it must be specified in the order contract so that low- and high-temperature resistant oil seals can be used during supply.