1. Overview

The JPQ(D) type progressive distributor consists of the first block A, the working block M, and the tail block E. The number of working blocks can be selected according to needs, with a minimum of three pieces and a maximum of 10 pieces. Each working block has There are two oil outlets, so each distributor group has between 6-20 oil outlets, that is, each distributor group can provide 6-20 lubrication points. The required amount of oil supply can be determined according to Model specification table data selection. If a certain lubrication point requires a large or extremely large amount of oil supply in one cycle of oil supply, the method in Figure A3 can be used to remove the closing screw inside the working block and add a plug to the oil outlet to make the two oil outlets The oil volume is combined into one oil outlet.

Note that the combined oil supply is the oil supply specified for the next work block model in the work block arrangement (see operating principle diagram). If the combined oil supply volume of the two oil outlets still cannot meet the needs, the method in Figure A4 can be used.Dry thin oil lubricationAdd a three-way or two-way bridge joint to collect the oil volume from several oil outlets to meet needs.