1. Conditions of use

The front of the VSKV-KR double-line distributor is equipped with upper and lower oil outlets. When the distributor piston moves forward and reverse, grease is discharged from the upper and lower oil outlets respectively. You can also directly observe the working condition of the distributor from the movement of the indicator rod, and adjust the oil supply volume of the oil outlet within the specified range by adjusting the screw.

This type of distributor is suitable for dual-line dry oil centralized lubrication systems with a nominal pressure of 40 MPa. Under the alternating oil supply pressure of the two oil supply main pipes, the oil supply pressure directly controls the piston action to complete the oil supply. Quantitative distribution to lubrication pointsProcess lubricationfunction of lipids.

2. Technical parameters

The medium used is grease (NLGI 0# ~ 2#) with a cone penetration of not less than 265 (25℃, 150g) 1/10mm or lubricating oil with a viscosity grade greater than N68; the operating ambient temperature is -10~80℃; When the medium is lubricating oil, please use it under a pressure of 20MPa.

3. Model marking instructions

4. Overall dimensions

5. Ordering Instructions

If the distributor is installed and used at an ambient temperature other than -10 to 80°C, it must be specified in the order contract so that low- and high-temperature resistant oil seals can be provided during supply.