1. Overview
This pump is suitable for filling lubricant into the oil reservoir of a manual lubrication pump with a pressure level of 31.5 MPa or a small electric lubrication pump with a pressure level of 40 MPa. Because this pump has the characteristics of oil discharge filtration, oil level display and easy operation, it is especially suitable for filling grease into lubrication pumps without filter devices at the oil supply port of the oil reservoir.
2. Technical parameters
The medium used is grease with a cone penetration of not less than 220 (25°C, 150g) 1/10mm and lubricating oil with a viscosity grade greater than N46.
3. Model description
4. Working principle
When the operating handle moves upward, the volume of the upper chamber of the piston gradually becomes smaller, and the lubricant is sent along the delivery hose.Smart lubricationIn the oil reservoir of the pump, the lower part of the piston gradually becomes larger, forming a negative pressure. The one-way valve in the pipe cap opens and sucks the lubricant in the oil barrel. When the handle moves downward, negative pressure forms in the upper chamber of the piston, the lower one-way valve closes, the upper one-way valve of the piston opens, and lubricant enters the upper chamber of the piston. When the handle moves upward again, repeat the above process.
5. Dimensions
6. Instructions for use
1. When in use, one end of the oil delivery hose is connected to the outlet of the fuel pump, and the other end is connected to the supply port of the oil reservoir. After use, the other end should be screwed on the barrel cover bolt.
2. The filter should be cleaned regularly
3. When the oil mark is in the lower position, the barrel should be filled with grease in time to prevent grease-free air from being mixed into the oil reservoir.
Address: No. 010, Xinglong Road, Huilong Industrial Park, Qidong City
Sales hotline: 0513-83637668
Company fax: 0513-83637098
After-sales service: 0513-83635700
Website: delcan.cn
E-mail:qd3637668@163.com
Scan to learn more