1. Overview:

It is suitable for filling grease into the oil reservoir of electric lubrication pump in dry oil centralized lubrication system. The pump is of a type without an oil storage barrel and is placed directly on a 200L oil barrel. It can be operated alone. It can be connected to the corresponding electronic control device to realize automatic grease replenishment of the electric lubrication system. This pump is a built-in plunger positive displacement pump, which adopts worm gear reduction transmission. It operates smoothly and has high output pressure. A pressure regulating safety valve is installed at the outlet to provide overload protection.

2. Technical parameters:

The applicable medium is grease with a penetration of 265 ~ 385 (25℃, 150g) 1/10mm (NLGI0# ~ 2#)

3. Model description: Introduced model: BA-2

4. Dimensions:

5. Action description:

The vertically installed motor drives the worm gear to rotate through the worm. An eccentric shaft is installed on the end face of the worm gear. The crank connecting rod drives the plunger to reciprocate up and down. The pressure oil suction process is completed by the action of the inside of the piston and the one-way valve in the pipe cap. The oil hose is transported outward.

6. Instructions for use:

1. It is recommended to rotate the wiring in the direction of the rotation arrow.

2. UsedSmart lubricationThe grease must be clean, uniform, and within the specified viscosity range.

3. Before first use, lubricating oil (N220) should be injected into the reduction gearbox to the specified oil level.

4. After the fuel pump is started for the first time, the air release valve should be opened first and closed after normal oil discharge.

5. Do not run dry without grease in the barrel.