1. Overview

Applicable toDry thin oil lubricationIn the system, a piston-type electric refueling pump is used to fill the oil storage barrel of the electric lubrication pump with grease. This pump is a built-in plunger positive displacement pump. It uses a reduction motor to directly drive the eccentric wheel to rotate and drive the pull rod to reciprocate to achieve the function of suctioning pressure oil. It operates smoothly, has high output pressure, and is equipped with an outlet filter device.

2. Technical parameters

The medium used is grease with a cone penetration of not less than 220 (25 ℃, 150g) 1/10mm and lubricating oil with a viscosity grade greater than N68.

3. Dimensions

4. Model marking instructions

5. Working principle

The horizontally installed reduction motor drives the eccentric wheel to rotate, driving the slider and pull rod to reciprocate up and down. The action of the piston and the one-way valve in the pipe cap completes the process of suctioning the pressure oil, and sends it out through the oil delivery hose.

6. Instructions for use

1. Before use, unscrew the oil plug above the casing and add No. 50 mechanical oil to the specified oil level.

2. The conveyed medium must be clean, uniform in texture, and within the specified viscosity range.

3. The filter at the outlet should be cleaned regularly.

4. Do not run dry when there is no oil in the barrel.

5. During the first three months of use of the motor reducer, an appropriate amount of 3# molybdenum disulfide must be added from the exhaust plug hole.Smart lubricationfat, and then replenish it every four months.

7. Ordering Instructions

The pump can realize fully automatic control and can also be equipped with an oil level signaling device. This must be specified separately in the contract when ordering.