1. Conditions of use

The VSG-KR double-line distributor has oil supply ports on the upper and lower sides. When the distributor piston moves forward and reverse, the oil is discharged from the upper and lower oil supply ports respectively. There is a two-in-one oil drain structure in the corresponding upper and lower oil feed ports. To change the odd number of oil outlets, just adjust the direction of the guide sleeve. You can also directly observe the working condition of the distributor from the movement of the indicator rod. At the same time, you can also easily adjust the oil supply volume of each oil outlet within the specified range by adjusting the screws.

This type of distributor is suitable for two-line dry oil concentration with a nominal pressure of 40MPa.Dry thin oil lubricationin the system. Under the action of the alternating oil supply pressure of the two oil supply main pipes, the oil supply pressure directly controls the piston action and completes the function of quantitatively distributing grease to the lubrication point.

2. Technical parameters

3. Model marking instructions

4. Overall dimensions

5. Instructions for use

If the upper and lower outlets need to be combined accordingly, just rotate the guide bush in the hole 90°, and seal the unused oil outlet at the upper or lower end with a G1/4 screw plug to prevent dust from intruding.

6. Ordering Instructions

If the distributor is installed and used with an ambient temperature outside the range of -10°C to 80°C, it must be specified in the order contract so that low- and high-temperature resistant oil seals can be provided during supply.